Motorcycle Storage Procedures
- Items of a motorcycle that should be addressed before putting it
up for winter or long-term storage. By Robb Nelson |
|
Oil
Drain Funnel - Why pay $20 for a special funnel when
you can make your own for less than $2? By KingTutt |
|
Painting
Vinyl Seats - Are you tired of that old faded seat? Do
you have a late 80's KLR with a color scheme designed by Kawasaki's
watercraft department? By Dale Wagler |
|
Plastic
Restoration (via Painting) - It's no secret that dirt
bike plastic fades and tanks yellow and lose decals as they age. After
good advice, this is what I've found works well. By Edward Pinzel |
|
Rear
Fender Bag - Here is an inexpensive rear fender bag for
dirt bikes that do not have a rear luggage rack. By Jlutty650L |
|
Registration
Decal Saver - No more destroyed registration stickers
when you remove your fork legs for service! (may or may not be legal)
By 4Strokes.com |
|
Rim
Lock / Bead Lock / Bead Stopper Installation - If you
switched from Dual Sport type tires to full knobbies, chances are
you will need to install a rim lock. By 4Strokes.com |
|
Seat
Cover & Graphics Installation - Sooner or later the
graphics on your thumper are going to start looking ratty. By 4Strokes.com |
|
Side
Panel Skids - Teflon rods cut in half lengthwise then
attached to the side panels with counter-sunk bolts. By motomonte |
|
Spring
Preload, Race Sag & Suspension Adjustments - Setting
the proper race sag is important for competition use. By 4Strokes.com |
|
Testing
for a Suspected CDI Problem - The first thing to do is
to look at all the wires in the electrical system and make sure the
insulation is not worn through... By qadsan |
|
Thumper
Starting Procedure - If the engine is cold it may help
to turn the idle screw up slightly to aid in warm-up and give the
engine a little extra fuel. By 4Strokes.com |
|
Tire
Removal & Installation - 1. Set rear wheel
sprocket side down and front wheel brake side up. 2. Remove
valve core
and loosen rim locks. By 4Strokes.com |
|

TopSpeed V2.1 (151KB
ZIP file) - TopSpeed Calculator by KAMware. Calculates for the following
parameters: engine, gearing, exhaust, cam lobe center, and horsepower. |
|
Understanding
Your Suspension - There are a few basic forces at work
in suspensions that must be understood before making successful
changes. By NOS |