| 4Strokes.com Technical: Registration Decal Saver |
 If
you live in California or any other state where registration decals
are required and you have to place it on the fork tube, here's
a nifty idea that allows removal and re-installation of your the
decal without damage. Go down to your local hardware store and
buy a fluorescent light bulb safety guard. They are very inexpensive
and the tubes are Clear UV stabilized so they won't turn yellow.
Directions: Cut a section equal to
the length between the top and bottom triple-clamps or the width
of the decal. Apply your registration decal to the tube
section. Slit the tube lengthwise and slip it on the fork. That's
it!
This clear tubing can be used for
numerous other things like fork guards, crossbar pad map holder,
etc. You're only limited by your imagination!
4Strokes.com Technical: Main
Menu |
